[Keith Wassung]

Many years ago, while serving in the military, I was sent on a temporary assignment to the west coast for a couple of weeks to attend a technical school. After checking in at the base, I changed my clothing and went in search of the base gym. This particular base had just built a state of the art athletic complex with basketball courts, racquetball courts, indoor running track and two indoor pools.

Though I hoped that the weight room would be well equipped, I was not surprised to find a small dusty room in the back littered with assorted bars and plates and few basic pieces of rusty equipment. I trained for about forty-five minutes and decided to finish up with a couple of hard sets of bar dips. I have always enjoyed doing bar dips, it is a basic exercise that doesn't require a whole lot of thought, you can just focus on going up and down and pushing them to the absolute limit. Dips are probably the easiest exercise that you can do forced reps and negatives without the aid of a spotter. The small weight room had no equipment for dips and I was unable to rig up a temporary set of dip bars. I left the weight room and walked down the hall into the basketball court area in hopes of finding a couple of chairs or some railings which could be used for dips. I spotted an old pair of gymnastic parallel bars in a corner of the gym. I went back to the weight room, collected a couple of 25lb plates along with my belt and dipping hook and walked back to the parallel bars to do a couple of sets of dips to complete my training for that day. Those three sets of dips were easily the best three sets of dips that I had ever done in my life. The movement was smooth, the weight felt relatively light and when I was done I felt a deep ache throughout my entire upper body. I thought that maybe the wooden bars had a bit of spring to them and that they were giving me an artificial bounce. I had used the very ends of the bars and I concluded that they were as rigid as any steel parallel bars. I continued to use the gymnast bars for the next two weeks and I improved my weight for reps on each successive workout. When I resumed my training at my normal gym back home, I was disappointed to find that I was unable to duplicate the weight and reps that I had so easily performed on the gymnastic bars. Several months later, I trained at a small private gym, which featured equipment that had been custom made by the owner. The dip bars were constructed out of heavy-duty two-inch pipe. Using these bars, I again had a phenomenal dip workout. I concluded that it was the thickness of the bars themselves that were responsible for the increased performance. I have always made it a point since then do perform my bar dips with very thick bars. I believe that the added thickness helps distribute the weight more evenly across the hands and wrists, resulting in a more efficient movement. The difference between using standard dip bars and extra thick dip bars has to be experienced to be believed. If you are training in a commercial gym, it is simple to modify a set of regular dips bars to an increased thickness. You could make a plastic sleeve out of PVC piping and then wrap small towels around the bars and then slide the piping over the bars. You can also purchase Olympic bar adapter sleeves at most sporting goods store. These sleeves allow you to convert an exercise bar into one that can accept Olympic plates (why anyone would want to do that is beyond me) The sleeves can slide over most dips bars that are open ended to create a two-inch sleeve. If you train at home you can purchase a couple of two-inch ****l pipes from any hardware store and with the aid of some in-expensive muffler clamps, create a thick dip bar apparatus in your power rack. Use your imagination and be creative-you might just end up with a stronger and better developed upper body.


Keith Wassung

[datadog]

I hereby nominate Kieth for President.

// Edited out line that Chia bitchslapped


The wife works at Ace, definately be getting some rigging to try this!

[Revok]

Roughly what thickness are you talking about for the bars? The grips on my bars have a diameter of about 4", meaning I can't quite close my hand around them fully - do you recommend I pad them out some more?

Also, I use weights in a backpack rather than hooking the plates to my belt, as it's more convenient and I can switch the pack from my back to my chest to mix things up a bit (works good for chins too). Just an alternative idea.

[ground_N_pound5]

dips are my fav for triceps

[386]

Would bigger bars make the focus more or less on grip?

[dogmai]

386, there is no real grip work in doing dips anyways, just as in bench, the weight rests on your palms distributed through your wrists.

Keith, good post! I love adding dips at the end of my push day. The weight room at my JC has some thick ass bars too, I never thought anything of it because I haven't done dips on anything else besides thos, they're like 2.5" thick maybe 3". The only problem for me is I need to get my own weight belt because they don't have one. Soon, though. Very soon.

[The Big Dipper]

I love me some dips

[chia]

Originally Posted by datadog

I hereby nominate Kieth for President.

Seriously dude, when are you putting out a book?


The wife works at Ace, definately be getting some rigging to try this!

He has several books:

http://www.riverhorsepubl.com/index.html

[datadog]

Originally Posted by chia

He has several books:

http://www.riverhorsepubl.com/index.html

Well, ummmm, okay, Chia wins